Idc Connectors (Only For 3708/3716) - PURE M3700 User Manual

If Console cable is not available, run Telnet in PC for connection is OK.

4.5 IDC Connectors (Only for 3708/3716)

IDC connector is used for the voice interface (FXS and FXO) on the frame model. IDC connector
can easily connect PBX line and telephone wire together to the gateway. No special tools are
required; please follow the instruction to install:
(Remarks: For IDC connector, it's better to use No. 24 wire, e.g. CAT 5)
Get the material ready
Insert the insulated wires directly into the
block for wire insertion
Push the block down until it is locked to
flush the conductor with the probe
Cut off the conductor outside the edge to avoid from
causing the circuit shortage
Push from here
13
M3700
user manual
DCC NO. 91710015011