Information Required Before Installation; Ip Address - PURE M3700 User Manual

5.

Information required before Installation

You need to prepare the following information before installing the gateway.

5.1 IP Address

The gateway requires an IP address for operation. Before installation you need to know how to
obtain an IP address from your local ISP. Static IP, DHCP or PPPoE can be used. The following
table helps you to decide what information you need. If your ISP offers static IP, you may need to
obtain an IP from MIS personnel in order to prevent an IP conflict. Otherwise DHCP (most cable
broadband providers offer this) and PPPoE (most ADSL broadband providers offer this) will work
fine.
IP Environment
Static IP
Dynamic IP address (DHCP)
PPPoE
Requiring information
Public IP IP Address
Address Subnet Mask
Default Gateway
It is strongly suggested that you obtain an
IP address from MIS personnel in order to
prevent an IP conflict.
Private IP IP Address
Address Subnet Mask
Default Gateway
It is strongly suggested that you obtain an
IP address from MIS personnel in order to
prevent IP conflicts.
Your private IP requires an IP Sharing
device and you must configure the IP
Sharing device to treat the unit and the IP
that it is using as a virtual server.
DHCP mode
Account Number
Password
Your ISP normally provides this information.
If you don't have this information please
contact your ISP.
14