Table of Contents
Advertisement
Making SIP calls without proxy server:
The SIP protocol allows you to make SIP calls directly to the destination number without through the
proxy server. You can simply dial the SIP number to connect other SIP gateway. The typical
example is: 413189@61.220.145.70.
413189@61.220.145.70
routing through SIP Proxy.
Notice: For this type of SIP calls, the destination device's IP address is already known and fixed.
8.
Other Parameters
8.1 Dialing Plan
Dialing Plan controls the dialing behavior of users
8.1.1
Dialing Method
According to different configuration, user needs to select different dialing method.
(1) Dialing Plan: When the first (few) digits that user dials matches Dialing Plan (described in
next section 8.1.1.1 Dialing Plan), number is send to SIP Proxy and build call route to SIP
device, otherwise, make call route via local FXO port.
(2) Transparent: All numbers user dials are sent to SIP proxy server and all number that
controls M3700 is disabled, including the end code # of each dialing.
(3) Transparent with digitmap: All numbers user dials are sent to SIP proxy server and if any
numbers match digitmap, number is send to SIP Proxy immediately without waiting dial
end time. Please refer to 8.1.1.2 Digit Map
Web Folder: ADVANCED\DIALING PLAN
mailto:
in Phone Book can connect this gateway by number 413189 without
Other SIP gateway that had already configured
38
Advertisement
Table of Contents
