Roland Camm-1 PNC-1850 User Manual page 48

Instruction
Status Instructions
ESC .O [ESC].O
Outputs the Status
of Buffer, Pause
ESC .E [ESC].E
Output RS-232C
Error Code
ESC .L [ESC].L
Output I/O buffer
size
Abort Instructions
ESC .J [ESC].J
Abort Device Control
Instruction
ESC .K [ESC].K
Abort CAMM-GLIII
Instruction
ESC .R [ESC].R
Initialize Device
Control Instruction
42
Format Parameter
None
None
None
None
None
None
Range ([ ] is default)
Outputs the status codes of PNC-1850/1200 shown
in the table below.
C o d e
0
8
16
24
Upon reception of this instruction, the PNC-1850/
1200 will output the error codes related to data
transmission (RS-232C.) At the same time, it
displays an error and clears (clear the 5th bit of the
status byte.)
For information on displayed error messages, refer
to "2-6-2 Error Messages."
PNC-1850/1200 outputs the size of the I/O buffer
to the computer when receiving this instruction.
It usually outputs 1024 (bytes).
Aborts both the currently executed device control
instruction and output.
Continues to execute the CAMM-GL III instruction
in operation, aborts other incoming CAMM-GL III
instructions and clears the data buffer.
Initializes all settings established by the device
control instructions. Execution of [ESC].R brings
the same states as the following device control
instructions are executed.
[ESC].J, [ESC].M:, [ESC].N:, [ESC].H:,
[ESC].I: and [ESC].@:
Explanation
Meaning
Data remaining in buffer.
Buffer empty.
Data remaining in buffer. PNC-1850/1200
being paused (Pause On being displayed).
Buffer empty. PNC-1850/1200 being
paused (Pause On being displayed).