Starting The Pilot - FireplaceXtrordinair 36DV Owner's Manual

Starting The Pilot

The pilot flame is required to ignite the main burners (it also plays a safety role). It should be
left on once lit. It will stay lit unless the gas control valve is turned to "OFF". However, the
pilot will go out if the gas is shut off or if the fireplace malfunctions. If the pilot turns off
frequently, call your dealer for information. To start the pilot follow the directions below:
A Push the gas control
knob in slightly and turn
it to the "OFF" position.
The knob will not turn
from "ON" to "OFF"
unless the knob is
depressed slightly.
B Wait five minutes to let
any gas that may have
accumulated inside the
firebox escape. If you
smell gas, follow the
directions on the cover
"IF YOU SMELL GAS".
C Turn the gas control
knob to the "PILOT"
position and press the
knob in, this will allow
gas to flow to the pilot
light. Press the red
button on the pilot
igniter repeatedly until
you see the pilot light.
KEEP THE GAS
CONTROL KNOB
DEPRESSED FOR 30
SECONDS ONCE IT IS
LIT. Note: If the pilot
does not light after
several tries, call your
dealer for service.
D Release the gas control
knob. If the pilot goes
out, repeat step C. If the
pilot refuses to stay lit,
call your dealer for
service.
E Turn the gas control
knob counter-clockwise
to "ON". The pilot is
now lit and the fireplace
can be turned on and off.
O
A
PILOT ADJ
C
PILOT ADJ
PILOT ADJ
D
PILOT ADJ
(C
PERATION ONTINUED
B
5
minutes
PILOT
IGNITER
E
?
)
P 27
AGE
30
seconds
PILOT ADJ