Table of Contents
Advertisement
The castor consists of the front wheel and the fork. The
castors provide front contact with the ground and determine
the steering by the direction of the forks.
The manual brake is a parking brake. The two manual
brakes are used to secure the wheelchair when stationary.
Backrest upholstery
Backrest
Rear wheel
Rear wheel
support
Rear wheel axle
Handrim
Manual
brake
Frame
Steering tube
Chest strap
Armrest
tube
Belt
Seat upholstery
Knee support
Adjustable
footrest tube
Monobloc
footplate
Calf pad
Front wheel
2.Adjustments and maintenance
2.1. Seat elements
!
Always perform the necessary adjustments before the
user sits down the wheelchair in order to prevent any injury.
2.1.1. Depth adjustable seat (photo)
First loosen the 4 screws (A) (6 mm hexagonal key) loca-
ted on the actuator back supports in order to facilitate the
backrest supports sliding. Loosen the two external (B) and
internal (C) screws sideways (4 mm hexagonal key), then
simultaneously slide the two support tubes forwards or bac-
kwards (based upon user's morphology) to the preset holes.
Re-tighten the 4 screws (B & C) sideways.
!
Make sure the 4 screws on the actuator back supports
(A) are re-tightened, as there is a risk of vertical positioning
system dysfunction if the supports slide on the chassis tubes.
A
1
C
B
2
17
Advertisement
Table of Contents
