Frame; Side Frame; Stand Up Mechanism; Rear Wheel - Invacare Action Vertic User Manual

Wheelchair

Hide thumbs Also See for Action Vertic:

Table of Contents

Enlarged version

2.1.7.4. Calf strap (photo 11)

According to the position of the one-piece pallet (forwards

or backwards), tension adjustment should perfectly keep the

feet centered : adjust the strap with Velcro slings (E) in order

to stretch or slacken it.

Check that Velcro fasteners are in place and make sure

they perfectly overlap.

2.2. Frame

2.2.1. Side frames

Side frames are mainly designed to fix fork tubes for the

front wheels and multi-adjustable wheel attachments for the

rear wheels.

The rear wheels attachments allow two positions in length

and five in depth :

Active = forward for easier driving

Standard = delivered in series, stable up to 10° slope

Amputee = backward for increased stability

Note : the adjustments and positioning must be performed

by a professional technician upon agreement by a prescribing

physician. Please consult with you dealer

In « Active » position, it is necessary to use anti-tippers

to avoid any risk of tipping backwards when you drive on a

slope.

The raising / lowering mechanism does not need any particu-

lar adjustment or maintenance, just regularly make sure that :

- Electrical connections are in place and cables cannot be

crushed or cut during raising or lowering operation.

- Depending on use (once a week to once a month), regularly

lubricate the different articulations of the stand up mecha-

nism with fluid oil (same type as for a sewing machine) or 3

in 1 type oil spray equipped with precision tip.

Table of Contents