Options And Accessories; Push Handle; Anti-Tippers; Work Tray - Invacare Action Vertic User Manual

Wheelchair

Hide thumbs Also See for Action Vertic:

Table of Contents

Enlarged version

Firmly tighten the screws (B) after adjustment.

Keep your fingers away from movable parts to prevent injuries !

2.6. Options and accessories

2.6.1. Push handles (photo 17)

Take off the cap which shuts the backrest tube, insert the

handle into the tube, position the screw in the preset hole (A),

firmly retighten screw and nut sideways (4 mm Allen key and

10 mm spanner).

2.6.2.Anti-tippers (photo 18)

They prevent back tipping which ensures safety when driving

on slopes or crossing obstacles. Insert the anti-tipper small

wheel into the frame vertical tube, position the screw in the

preset hole (A), firmly retighten screw and nut sideways (4 mm

Allen key and 10 mm spanner).

The anti-tippers must not be used without the 24"

rear wheels nor be used as transfer wheels while the user is

sitting on the wheelchair.This is to prevent any fall which may

cause serious injuries.

It is positioned on the armpads ; fasten it to the armrest

tubes (on the painted tubes to the back of the armpads)

using Velcro fasteners. Release the quick tightening handles

(A), slide the tray forward or backward inside the aluminium

gutters based upon the user's build and retighten the quick

tightening handles (A).

The tray reduces the access to the raising-lowering knob.

Do not place heavy (> 5 kg) or instable objects, contai-

ners with very hot and corrosive liquids on the tray, which

may cause serious injury if they fall.

Table of Contents