Tension Adjustable Seat Upholstery; Height Adjustable Backrest; Tension Adjustable Backrest Upholstery - Invacare Action Vertic User Manual

Wheelchair

Hide thumbs Also See for Action Vertic:

Table of Contents

2.1.2.Tension adjustable seat upholstery (photo 3)

It allows to adjust the depth and curvature based upon user's

morphology. First disassemble one armrest panel by loosening

the 2 screws and the supports (4 mm hexagonal key and 10

mm key) , position the upholstery, if needed, according to the

depth adjustment (see above §) then adjust Velcro fasteners

(B) in order to stretch or slacken them in width. Reposition

the armrest panel (A) and securely tighten fastening screws.

Check the quality and positioning of Velcro fasteners.

2.1.3. Height adjustable backrest (photos 4 & 5)

For height adjustment, first take the backrest upholstery off,

slightly loosen the screw (A) with a 3 mm hexagonal key,

adjust to the desired height based upon the preset holes,

tighten without forcing. Reposition the backrest upholstery

according to the new height.

2.1.4.Tension adjustable backrest upholstery (Photo 5)

It allows to adjust the curvature of the backrest to the user's

morphology and body posture. Lift the flap and adjust the

Velcro straps in order to stretch or slacken them. Reposition

the flap.

Check the quality and positioning of Velcro straps.

Table of Contents