Invacare Action Vertic User Manual page 11

Wheelchair
Hide thumbs Also See for Action Vertic:
Table of Contents

Advertisement

Make sure that the four slings used to hold the body during
vertical positioning are in place and well adjusted , see § B
2.1.7. Straps and posture belts
Make sure that no obstacle or person (a child for ins-
tance) prevents the raising or lowering as there is a risk of
serious injury in case of body jamming in moving mechani-
cal devices.
Be careful not to hit an obstacle with the raising / lowe-
ring knob, as the possibility of the switch breaking could
cause an overly long blockage in the vertical position.
Make sure you always have the possibility to call for
assistance in case of a problem when standing up (mobile
phone or alarm necklace / bracelet at hand).
A
20
1.7.1. Standing up (photos 20 & 21)
After applying the above safety measures, you can stand
up : position your forearms on armrest tubes and operate
button (A) upwards ; stand up progressively (in stages) until
the prescribed vertical angle.The persons around you and
yourself will be advised that you are using the stand up func-
tion by a long beep (1 tone).
1.7.2. Sitting down (photo 22)
Keep your forearms on the armrest tubes and switch button
(A) down ; go down progressively (in stages) to the initial
seating position (beeping will stop).
Note :After no use during 30 minutes, 1 tone warns you of
the setting in a stand-by mode.
21
9
22

Advertisement

Table of Contents
loading

Table of Contents