Table of Contents
Advertisement
Invacare® H304 Finesse
Intended use
The product serves exclusively to raise the toilet seat and is
therefore only intended for installation and usage on toilets.
Any other use is prohibited.
Operating temperature: 10 – 40 °C
Scope of delivery (Fig. 1)
The following components are included in the scope of
delivery:
Raised toilet seat
A
User manual
B
Warranty
We provide a manufacturer's warranty for the product
in accordance with our General Terms and Conditions of
Business in the respective countries. Warranty claims can
only be made through the provider from whom the appliance
was obtained.
Quality
Quality is of the utmost importance for our company;
all processes are based on the ISO 9001 and ISO 13485
standards.
This product features the CE mark, in compliance with the
Medical Device Directive 93/42/EEC Class 1.
The product meets the requirements of the standards DIN
EN 12182 (Technical aids for disabled persons - general
requirements and test methods), DIN EN ISO 14971 (Medical
devices - Application of risk management to medical devices)
and DIN EN ISO 10993–1 (Biological evaluation of medical
devices - Part 1: Evaluation and testing within a risk
management system).
Invacare® is continuously working towards ensuring that the
company's impact on the environment, locally and globally,
is reduced to a minimum. It is Invacare's goal to ensure
that we, at the widest possible range, use REACH compliant
materials and components.
For further information please contact Invacare® in your
country (for addresses, see back page of this manual).
Service life
The expected service life of this product is three years when
used in accordance with safety instructions and intended
use, stated in this manual. The effective service life can vary
according to frequency and intensity of use.
Safety
Safety information
WARNING!
Risk of falling!
– Do not stand on this product.
– Do not use as a climbing aid.
– Do not use for transfer from the side or partial
load.
– Do not tilt.
WARNING!
Risk of injury!
– Do not use if defective.
– Do not make any unauthorized alterations or
modifications to the product.
– Do not move or displace the product under
load or during use.
2
Symbols on the product (Fig. 2)
A
This product complies with the directive 93/42/EEC
for medical products. The launch date for this
product is specified in the CE declaration of
conformity.
Load capacity
B
Product designation
C
Product time frame
D
Recycling symbol
E
Material specification
F
Assembly (Fig. 3)
CAUTION!
– Make sure that the hygiene recess A is facing
forwards.
– Make sure that the raised toilet seat is placed
even and firmly fits on the toilet bowl.
1. Place the raised toilet seat directly on the toilet bowl.
Maintenance
Maintenance and periodic inspection
The product is maintenance-free, provided that the cleaning
and safety instructions outlined in this user manual are
adhered to.
WARNING!
– Before first use, clean the product thoroughly.
– Before every use, check the product for damage
and ensure that it is securely attached to the
toilet bowl.
– Regularly clean and disinfect the product.
Cleaning and disinfection
IMPORTANT!
All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to clean.
For further information on decontamination in
Health Care Environments, please refer to 'The
National Institute for Clinical Excellence' guidelines
on Infection Control www.nice.org.uk/CG139 and
your local infection control policy.
– Clean by hand.
– Do not use any aggressive (pH value under 4.5
or over 8.5) or abrasive cleaning agents.
– Max. cleaning temperature 60 °C.
The product can be cleaned and disinfected using
commercially available cleaning agents.
1. Disinfect the product by wiping down all generally
accessible surfaces with disinfectant (after disassembling
the product, if possible).
After Use
Re-use
The product is suitable for repeated use. The number of
times it can be used depends on how often and in which
way the product is used. Before reuse, clean and disinfect
the product thoroughly
(→ Cleaning and disinfection, page 2 ), check the product for
damages and ensure a proper mounting.
1471117-D
Advertisement
Table of Contents
