End Of Sie
DRIVE BELT INSPECTION
Note
• Front and water pump drive belt deflection/tension inspection is not necessary because of the use of the
front drive belt auto tensioner.
Front Drive Belt
1. Verify that the drive belt auto tensioner indicator
mark does not eceeds the limit.
• If it eceeds the limit, replace the drive belt.
(SeeB3 DRIVE BELT
End Of Sie
DRIVE BELT REPLACEMENT
1. Remove the splash shield (RH).
2. Turn the center of the tensioner pulley clockwise
to release tension to the drive belt.
3. Remove the drive belt.
4. Reinstall the drive belt or install a new drive belt.
5. Verify that the drive belt auto tensioner indicator
mark does not eceeds the limit. (See
BELT
INSPECTION.)
• If it eceeds the limit, replace the drive belt.
6. Install the splash shield (RH).
End Of Sie
DRIVE BELT
DRIVE BELT
REPLACEMENT.)
B3 DRIVE
A6E221015800W01
B
AME2210W001
A6E221015800W03
AME2210W002
B3