Mazda 6 2002 Workshop Manual page 546

Hide thumbs Also See for 6 2002:

Table of Contents

Adjusting Cover Disassembly Note

1. Remove the adjusting cover.

Pinion Shaft and Housing Component Disassembly Note

1. Hold the pinion shaft as shown, and pull out the

pinion shaft and housing component.

Pinion Shaft Component Disassembly Note

• If the pinion shaft does not come out easily, remove it using a press.

1. Push out the pinion shaft componet from the

valve housing as shown.

Snap Ring Disassembly Note

1. Carefully remove the snap ring without damaging

the pinion shaft component.

ENGINE SPEED SENSING POWER STEERING

Chapters

Table of Contents