Mazda 6 2002 Workshop Manual page 435

DTC P0708 Transale range (TR) switch circuit high input
Diagnostic procedure
STEP
1 VERIFY FREEZE FRAME DATA HAS BEEN
RECORDED
• Has FREEZE FRAME PID DATA been
recorded?
2 VERIFY RELATED REPAIR INFORMATION
AVAILABILITY
• Check for related Service Bulletins availability.
• Is any related repair information available?
3 INSPECT TR SWITCH CONNECTOR FOR POOR
CONNECTION
• Turn ignition key OFF.
• Disconnect TR switch connector.
• Check for poor connection (damaged/pulled-
out pins, corrosion, etc.).
• Are TR switch terminals okay?
ON-BOARD DIAGNOSTIC
INSPECTION
Yes Go to net step.
No Record FREEZE FRAME PID DATA on repair order, then
go to net step.
Yes Perform repair or diagnosis according to available repair
information.
• If vehicle is not repaired, go to net step.
No Go to net step.
Yes Go to net step.
No Repair terminals or replace TR switch, then go to Step 9.
(See K–15 TRANSAXLE RANGE (TR) SWITCH
REMOVAL/INSTALLATION.)
ACTION
K–61
K