WINDSHIELD WASHER MOTOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See
3. Remove in the order indicated in the table.
1
Windshield washer motor
2
Grommet
4. Install in the reverse order of removal.
End Of Sie
WINDSHIELD WASHER MOTOR INSPECTION
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See
3. Connect battery positive voltage to the motor
terminal B and ground to the motor terminal A.
4. Verify that the windshield washer motor operates.
• If the motor does not operate, replace the
windshield washer motor.
End Of Sie
WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See
3. Remove the headlight cleaner motor. (See
INSTALLATION)
4. Remove in the order indicated in the table.
1
Connector
2
Washer fluid-level sensor
3
Grommet
5. Install in the reverse order of removal.
End Of Sie
WIPER AND WASHER
T58 WASHER TANK
REMOVAL/INSTALLATION)
T58 WASHER TANK
REMOVAL/INSTALLATION)
T58 WASHER TANK
REMOVAL/INSTALLATION)
T69 HEADLIGHT CLEANER MOTOR REMOVAL/
A6E811676670W01
A6E8116W123
A6E811676670W02
T
A6E8116W129
A6E811676670W03
A6E8116W114
T59