Jacking Positions ,Vehicle Lift (2 Supports),Safety Stands (Rigid Rack) Positions; Jacking Positions, Vehicle Lift (2 Supports) And Safety Stand (Rigid Rack) Positions - Mazda 6 2002 Workshop Manual

JACKING POSITIONS, VEHICLE LIFT (2 SUPPORTS),
JACKING POSITIONS ,VEHICLE LIFT (2 SUPPORTS),

JACKING POSITIONS, VEHICLE LIFT (2 SUPPORTS) AND SAFETY STAND (RIGID RACK) POSITIONS

Jacking Positions
Warning
• • • • Improperly jacking a vehicle is dangerous. The vehicle can slip off the jack and cause serious
injury. Use only the correct front and rear jacking points and block the wheels.
• Use safety stands to support the vehicle after it has been lifted.
Front
• At the jacking plate of the engine support member.
Rear
• At the center of torsion beam ale.
Vehicle Lift Positions
Front and rear
Warning
• • • • Unstably lifting a vehicle is dangerous. The vehicle can slip off the lift and cause serious injury
and/or vehicle damage. Make sure that the vehicle is on the lift horizontally by adjusting the height
of support at the end of the arm of the lift.
Safety Stand Positions
Front
• Both sides of the vehicle, on side sills.
Rear
• Both sides of the vehicle, on side sills.
GI–24
SAFETY STANDS (RIGID RACK) POSITIONS
SAFETY STANDS (RIGID RACK) POSITIONS
A6E202200019W01