Table of Contents
Advertisement
[DVI-D IN]
Switch the setting when the external device is connected to the <DVI-D IN> terminal of the projector and the image is not projected correctly.
1)
Press as to select [DVI-D IN].
2)
Press the <ENTER> button.
f The [DVI-D IN] screen is displayed.
3)
Press as to select [EDID].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[EDID3]
[EDID1]
[EDID2:PC]
5)
Press as to select [SIGNAL LEVEL].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[0‑255:PC]
[16‑235]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The data for Plug and play will change when the setting is changed. Refer to "List of compatible signals" (x page 168) for a resolution that
supports plug and play.
[HDMI IN]
Switch the setting when the external device is connected to the <HDMI IN> terminal of the projector and the image is not projected correctly.
1)
Press as to select [HDMI IN].
2)
Press the <ENTER> button.
f The [HDMI IN] screen is displayed.
3)
Press qw to switch the [SIGNAL LEVEL] item.
f The items will switch each time you press the button.
[AUTO]
[64‑940]
[0‑1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The HDMI signal level is displayed for 30 bits of input.
[SDI IN]
Set this item according to the signal to be input to the <SDI IN> terminal.
Chapter 4 Settings — [DISPLAY OPTION] menu
Recognizes movie-based video signals and still image signals automatically.
Select this item mainly when an external device that outputs movie-based video signals (such as a
Blu-ray disc player) is connected to the <DVI-D IN> terminal.
Select this item mainly when an external device that outputs still image-based video signals (such as
a computer) is connected to the <DVI-D IN> terminal.
Automatically sets the signal level.
Select this item when the signal output from the DVI-D terminal of an external device (such as a
computer) is input to the <DVI-D IN> terminal.
Select this item when the signal output from the HDMI terminal of an external device (such as a Blu-
ray disc player) is input to the <HDMI IN> terminal via a conversion cable or similar cable.
Automatically sets the signal level.
Select this item when the signal output from the HDMI terminal of an external device (such as a Blu-
ray disc player) is input to the <HDMI IN> terminal.
Select this item when the signal output from the DVI-D terminal of an external device (such as a
computer) is input to the <HDMI IN> terminal via a conversion cable or similar cable.
Select this item also when the signal output from the HDMI terminal of a computer or other device is
input to the <HDMI IN> terminal.
ENGLISH - 87
Advertisement
Table of Contents
