Table of Contents
Advertisement
5)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
[NETWORK STATUS]
Display the status of the projector network.
1)
Press as to select [NETWORK STATUS].
2)
Press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
[Art-Net SETUP]
Make settings to use the Art-Net function.
1)
Press as to select [Art-Net SETUP].
2)
Press the <ENTER> button.
f The [Art-Net SETUP] screen is displayed.
3)
Press as to select an item.
[Art-Net]
[PORT ADDRESS]
[START ADDRESS]
4)
Press qw to switch the setting.
5)
Press as to select [STORE], and press the <ENTER> button.
6)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Network connection
The projector has a network function, and the following operations are available from the computer using the web control.
f Setting and adjustment of the projector
f Display of the projector status
f Setting of E-mail message to be sent
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f A LAN cable is required to use the network function.
r Example of a normal network connection
Chapter 4 Settings — [NETWORK] menu
Sets to [ON] when you use the Art-Net function.
Sets to [OFF] when you do not use the Art-Net function.
Enter a port address where the projector processes Art-Net.
Enter a start address where the projector processes Art-Net.
Computer
LAN cable (straight)
Hub
Projector
LAN cable (straight)
ENGLISH - 123
Advertisement
Table of Contents
