Table of Contents
Advertisement
Channel
Control details
8
Fade-in time setting
9
Fade-out time setting
10
No operation
11
Geometric adjustment
Note
f If the projector is operated with the remote control or on the control panel, or by the control command while controlling the projector using
the Art-Net function, the setting of the DMX controller and the computer application may be different from the projector status. To reflect the
controls of all channels to the projector in that case, set "Lock" of channel 7 to "Operation not available" and then set back to "Operation
available".
Control commands via LAN
When web control administrator rights password is set (Protect mode)
Connecting
1)
Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a
connection to the projector.
f You can obtain both the IP address and the port number from the menu screen of the projector.
IP address
Port number
2)
Check the response from the projector.
158 - ENGLISH
Chapter 6 Appendix — Technical information
Performance
0.0s
0.5s
1.0s
1.5s
2.0s
2.5s
3.0s
3.5s
4.0s
5.0s
7.0s
10.0s
No operation
0.0s
0.5s
1.0s
1.5s
2.0s
2.5s
3.0s
3.5s
4.0s
5.0s
7.0s
10.0s
No operation
―
OFF
KEYSTONE
CURVED
No operation
CORNER CORRECTION
No operation
Obtain from the main menu → [NETWORK] → [NETWORK STATUS]
Obtain from the main menu → [NETWORK] → [NETWORK CONTROL] → [COMMAND PORT]
Parameter
0-15
16-31
32-47
48-63
64-79
80-95
Operate together with channel 1.
96-111
112-127
128-143
144-159
160-175
176-191
192-255
0-15
16-31
32-47
48-63
64-79
80-95
Operate together with channel 1.
96-111
112-127
128-143
144-159
160-175
176-191
192-255
―
0-15
16-31
32-47
48-95
96-111
112-255
Remark
―
―
―
―
Advertisement
Table of Contents
