Table of Contents
Advertisement
Note
f The entered password is displayed with*marks on the screen.
f When numerical values are used for the security password, the security password is required to be initialized if the remote control is lost.
Consult your dealer for the method of initialization.
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1)
Press as to select [DISPLAY SETTING].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[TEXT]
[USER LOGO]
Note
f To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.
[TEXT CHANGE]
Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLAY SETTING].
1)
Press as to select [TEXT CHANGE].
2)
Press the <ENTER> button.
f The [TEXT CHANGE] screen is displayed.
3)
Press asqw to select the text, and press the <ENTER> button to enter the text.
4)
Press asqw to select [OK], and press the <ENTER> button.
f The text is changed.
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1)
Press as to select [CONTROL DEVICE SETUP].
2)
Press the <ENTER> button.
f The [CONTROL DEVICE SETUP] screen is displayed.
3)
Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
[CONTROL PANEL]
[REMOTE CONTROL]
4)
Press the <ENTER> button.
f The [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
5)
Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
Press qw to switch the item.
f You can set the operation restriction from the control panel or the remote control.
[ENABLE]
[DISABLE]
[USER]
7)
Press as to select [APPLY], and press the <ENTER> button.
f The confirmation screen is displayed.
8)
Press qw to select [OK], and press the <ENTER> button.
Chapter 4 Settings — [SECURITY] menu
The text display is disabled.
The text display is enabled.
Displays the image registered by the user.
You can set the limitation on the control from the control panel.
You can set the limitation on the control from the remote control.
Enables all button operations.
Disables all button operations.
Operation of all buttons can be enabled/disabled separately.
Refer to "Enabling/disabling any button" (x page 120) for details.
ENGLISH - 119
Advertisement
Table of Contents
