Using Your Printer With A Pc; Installing Usb Driver; Creating And Printing Labels From A Pc - Brady BBP 31 User Manual

Using Your Printer with a PC

Installing USB Driver

Creating and Printing Labels from a PC

®
BBP 31 Sign & Label Printer User's Manual
You can use a personal computer to install software upgrades, or to create labels
on the PC rather than working directly on the printer.
Note: You must have labeling software installed on your computer to create, edit
or print labels from the PC. Refer to your labeling software documentation for
instructions about installing and using the software. See "Compatible Applications"
on page 1-2 for more details.
If you are connecting the BBP
device driver installed on your PC. Once connected, the PC should automatically
detect and install the USB driver, if it is not already installed.
Attach the end of the USB cable to the printer, then
1. small
cable to the PC.
Turn the printer on.
2.
right corner of the screen and the print driver wizard is launched.
In the , click
3. Wizard
selected).
4. Click Next . The print driver installs. This takes a minute or two.
When complete, in the
5.
®
The BBP 31 printer is now available to receive information from your computer
labeling program.
When printing from the PC, the printer must be attached to the PC via the USB
cable. Be sure to select the BBP
labeling program you are using.
To PC
1. Connect the USB cable from the printer to any available USB port on the PC.
2. From your labeling software, print your labels to the BBP
Note: You cannot save labels or templates from the PC to the printer.
Using Your Printer with a PC
®
31 printer to your PC, you will need the USB
On the PC, "Found New Hardware" pops up in the lower
Install the software automatically (if it is not already
, click
Wizard Finish
®
31 printer in the print dialog box of the PC
To Printer
Creating and Printing Labels from a PC
the flat end of the
.
®
31 printer.
2-57