Table of Contents
Advertisement
12
Connecting
Connecting to a PC
Connecting to a PC
In order to send data from a Brady PC labeling program to the BMP
install the BMP
Drivers CD enclosed with your BMP
The BMP
recognize the new hardware (printer) when it is attached and will launch a wizard that will
auto-install the printer drivers.
To install the printer drivers:
1.
2.
On the PC, "Found New Hardware" pops up in the
lower right corner of the screen.
3.
The printer drivers wizard is launched.
4.
Download Print Drivers
You can also download the print drivers from the Brady website at
website, choose Support>Downloads, then follow the instructions on the screen.
®
BMP
51 User's Manual
®
51 printer driver. The printer drivers can be found on the Brady Printer
®
51 printer is a "plug-and-play" printer which means your PC will automatically
Attach the small end of the USB cable to the
printer, then the flat end of the cable to the PC.
Turn the printer on.
Insert the Brady Printer Drivers CD into the CD
drive of your computer.
Follow the prompts on the screen for installation of a particular driver.
Note:
After successful completion of the installation process, follow the directions
included with the Label Software. If it appears that the printer has lost
communication with the host computer while still connected via the USB cable,
turn the printer off, then restart it to restore the connection.
®
51 printer package.
®
51 printer, you must
www.bradyid.com.
On the
Advertisement
Table of Contents
