Table of Contents
Advertisement
ITEM
Interfaces
Universal Serial Bus
(USB)
Network
Parallel Interface
Duty cycle
MTBF
MTTR
Toner life
Image drum life
Belt life
Fuser life
Power supply
Power consumption
Operating environment Operating 10 to 32 °C/20 to 80% RH
Print environment
Noise Levels
a. Exit method is limited by paper size, media weight and paper feed.
b. To comply with the requirements of Energy Star, when no data is present for a set period of time,
the printer goes into a power-saving mode. The printer has a "wake-up" feature which, when
initiated from a host device or the operator panel, will revert the printer to its "running" mode.
Specifications subject to change without notice. All trademarks acknowledged.
SPECIFICATION
USB specification Version 2.0
Connection: USB type B
Cable: USB specification version2.0 (shielded)
Transmission mode: High speed (480Mbps + 0.25% maximum)
10 Base T, 100 Base TX
36 pin Centronics type, receptacle - IEEE 1284-1994
50,000 pages per month max., 10,000 pages per month average
100.000 pages
20 minutes
Starter:
CMYK:
2,000 A4 pages @ 5% coverage (750 pages used to initially charge image drum)
Replacement:
K: 7,500 A4 pages @ 5% coverage
C, M & Y: 7,000 A4 pages @ 5% coverage
20,000 A4 pages average
80,000 A4 pages at 3 pages per job-
100,000 A4 pages at 3 pages per job-
220 to 240VAC @ 50/60 Hz ± 2%
Operating: 1350W peak; 570 W av. (25°C)
Idle: 200 W typical (25°C)
b
Power saving
: <17W
(optimum 25 °C wet, 2 °C dry)
Off: 0 to 43 °C/10 to 90% RH
(optimum 26.8 °C wet, 2 °C dry)
30 to 73% RH @ 10 °C; 30 to 54% RH @ 32 °C
10 to 32 °C @ 30% RH; 10 to 27 °C @ 80% RH
Colour 17 to 27 °C @ 50 to 0% RH
Operating: Mono/Colour - less than 54dBa
Standby Mode: less than 37dBa
Power Saving Mode: Background level
Specifications > 81
Advertisement
Table of Contents
