Oki ES8430 User Manual page 33

ITEM
Print Setup Mono-Print
(cont.) Speed
Default
Orientation
Form Length
Edit Size
X Dimension
Y Dimension
PS Setup Network
Protocol
Parallel
Protocol
USB
Protocol
SETTINGS EXPLANATION
Auto Sets the monochrome print speed. Prints at the most
appropriate speed for page process if Auto is set.
Mono 32ppm
Color Speed Prints always at the color print speed if Color is set.
Mixed Speed Prints always at the monochrome print speed if Normal is
set.
Prints always at 26ppm of the gradation print speed for
both color and monochrome print if High Quality is set.
Portrait Specifies print orientation.
Landscape Not valid for PS (valid only for PCL/ IBMPPR/EPSONFX/
HP-GL2).
5 lines Sets the number of lines that can be printed on a page
~ Not valid for PS (valid only for PCL/HP-GL2).
64 lines Default values listed to the left are for Letter/A4. In
practice, however, they change according to the size of
~
paper loaded in the tray.
128 lines
Cassette Size/ Sets the size of an area to draw when the host PC does
A3/A4 Short not specify the size via the paper edit size designating
Edge/A4 Long command (Not valid for PS - only for PCL).
Edge/A5/A6/B4/
B5 Short Edge/
B5 Longt Edge/
Legal14/
Legal13.5/
Legal13/Tabloid/
Letter Short
Edge/Letter
Long Edge/
Executive/
Custom/Com-10
Envelope/DL
Envelope/C5/C4/
64 mm Specifies paper width of Custom paper as a default value.
~ Sets a paper size at right angles to the paper run
direction.
210 mm
~
297 mm
105 mm Specifies paper length of Custom paper as a default value.
~ Sets a paper size in the same direction as the paper run
direction.
297 mm
~
1321 mm
ASCII/RAW Specifies PS communication protocol mode of data from
NIC port.
(In RAW mode, Ctrl-T is invalid). PS models only.
ASCII/RAW Specifies PS communication protocol mode of data from
Centronics port.
(In RAW mode, Ctrl-T is invalid). PS models only.
ASCII/RAW Specifies PS communication protocol mode of data from
USB port.
(In RAW mode, Ctrl-T is invalid). PS models only.
Menu functions > 33