Table of Contents
Advertisement
ITEM
IBM PPR
Character
Setup
Pitch
Font
Condense
Character
Set
Symbol
Set
Letter O
Style
Zero
Character
Line Pitch
White
Page Skip
CR Function
LF Function
Line Length
Form Length
TOF Position
Left Margin
Fit to
Letter
Text
Height
Continuous
Paper Mode
SETTINGS
EXPLANATION
10 CPI
Specifies character pitch in IBM PPR emulation.
12 CPI
17 CPI
20 CPI
Proportional
12CPI to
Specifies 12CPI pitch for Condense Mode.
20CPI
12CPI to 12CPI
SET-2
Sets a character set.
SET-1
IBM 437
Sets the Symbol Set for IBM PPR (see machine operator
panel for complete list).
Enable/Disable
Specifies the style that replaces ø (9B) and ¥ (9D) with ø
(ou) and Ø (zero).
Normal/Slashed
Specifies the style of 0(zero). SLASHED: SLASH ZERO
6/8 LPI
Sets line space.
On/Off
Sets whether to eject a blank sheet. Available only when
simplex is set.
CR/CR+LF
Sets action when CR code is received.
LF/LF+CR
Sets action when LF code is received.
80/136 Column
Specifies the number of characters per line.
11/11.7/12 inch
Specifies the length of paper.
0.0/0.1/~1.0
Sets the position from the top edge of paper.
inch
0.0/0.1/~1.0
Sets the amount to shift the horizontal print start position
inch
to the right.
Enable/Disable
Sets the printing mode that can fit print data, equivalent
to 11 inches (66 lines), in the LETTER-size printable area.
Same/Diff
Sets height of a character.
SAME: Regardless of CPI, same height
DIFF: According to CPI, character heights vary.
On/Off
Sets printer for using continous feed stationary.
Menu functions > 36
Advertisement
Table of Contents
