Bcm50 Features; Bcm50 Applications - Nortel BCM50 Installation And Configuration Manual

• Small system rackmount shelf: A shelf designed for mounting up to four BCM50 units into a
standard 19-inch equipment rack. An optional patch field is available, which provides RJ-45
connectors for all BCM50 main unit trunk and station interfaces, and a terminal block to
connect the auxiliary equipment.

BCM50 features

BCM50 supports the complete range of IP telephony features offered by existing BCM products.
You enable the following features by entering the appropriate keycodes (no additional hardware is
required):
• VoIP Gateway (H.323): Up to 12 VoIP trunks
• VoIP Telephony Clients: Up to 32 VoIP Telephony clients, supporting the range of Nortel
IP Phones

BCM50 applications

BCM50 also supports many of the high-value applications provided on the existing BCM
platforms.
You enable applications by entering the appropriate keycodes (no additional hardware is required).
Some applications are:
• Voice Messaging, for standard voicemail and auto-attendant features
• Unified Messaging, providing integrated voicemail management between voicemail and
common email applications
• Fax Suite, providing support for attached analog fax devices
• Voice Networking features
• LAN CTE
BCM50 IP Telephone Installation and Configuration Guide
Chapter 1 Getting started 9