Multi-Functional Indicator (Onboard Computer) - Skoda Octavia Owner's Manual

14 Instruments and warning lights
If the control unit recognises that it is appropriate to change the gear, an arrow
is shown in the display. The arrow points up or down, depending on whether it is
recommended to shift into a higher or lower gear.
At the same time, the recommended gear is indicated instead of the currently en-
gaged gear .
A

Multi-functional indicator (onboard computer)

Introduction
The multi-functional indicator appears in the display
display ⇒ p age 17 depending on the equipment fitted to your vehicle.
The multi-functional indicator offers you a range of useful information.
The outside temperature
Driving time
Current fuel consumption
Average fuel consumption
Range
Distance driven
Average speed
Current speed
Oil temperature
Warning against excessive speeds
On vehicles which are fitted out with information display, it is possible to switch
off the display of some information.
Note
● In certain national versions the displays appear in the Imperial system of
measures.
● If the display of the second speed is activated in mph, the current speed is not
indicated in km/h on the display.
⇒ f ig. 5
or in the information
⇒ p age 15
⇒ p age 15
⇒ p age 16
⇒ p age 16
⇒ p age 16
⇒ p age 16
⇒ p age 16
⇒ p age 16
⇒ p age 17
⇒ p age 17
Memory
B

The multi-functional indicator is equipped with two automatic memories. The se-
lected memory is displayed in the middle of the display field
The data of the single-trip memory (memory 1) is shown if a 1 appears in the dis-
play. A 2 shown in the display means that data relates to the total distance mem-
ory (memory 2).
Switching over the memory with the help of the button
screen wiper lever or with the help of the button
steering wheel.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the igni-
tion is switched on until it is switched off. New data will also flow into the calcula-
tion of the current driving information if the trip is continued within 2 hours after
switching off the ignition. If the trip is interrupted for more than 2 hours, the
memory is automatically erased.
Total-trip memory (memory 2)
The total distance driven memory gathers data from any number of individual
journeys up to a total of 19 hours and 59 minutes driving or 1 999 kilometres driv-
en. 99 hours and 59 minutes driving time or 9 999 km driven in vehicles with an
Information display. The memory is deleted when either of these limits is reached
and the calculation starts from anew.

The total-trip memory will not, contrary to the single-trip memory, be deleted af-
ter a period of interruption of driving of 2 hours.
Fig. 5 Multi-functional indicator
⇒ f ig.
5.
⇒ f ig. 6
on the wind-
B
⇒ f ig. 6
D on the multifunction
£