Skoda Octavia Owner's Manual page 218

216 Fuses and light bulbs
Turn signal light (at the front)
Changing light bulb for turn signal light (at the front)
Switch the ignition and all lights off.
–
Remove the headlight ⇒ p age 215.
–
– Turn the socket in the direction of arrow OPEN (open) and take it out together
with the light bulb for the turn signal light
– Press the defective light bulb into the socket, turn to the left and remove.
– Press a new light bulb into the socket and turn the light bulb to the right as far
as the stop.
– Insert the socket with the changed light bulb into the headlight and secure it
by turning in the direction of arrow CLOSE (close) to the right.
Note
After installing the headlight, the headlight setting must be checked by a special-
ist garage.
Fig. 182 Removing the light bulb for the
turn signal light
⇒ f ig.
182.
Front parking lights and low beam
Removing the light bulb for the parking light
Switch the ignition and all lights off.
–
Remove the headlight ⇒ p age 215.
–
– Remove the protective cap
⇒ f ig.
– Remove the socket A
Take the faulty bulb out of the fixture and insert a new one.
–
Insert the protective cap.
–
Removing the light bulb for the low beam light
Switch the ignition and all lights off.
–
Remove the headlight ⇒ p age 215.
–
– Remove the protective cap
 – Turn the connector with the light bulb
⇒ f ig.
remove 183.
– Replace the lamp, insert the connector with the new lamp and turn to the
right up to the stop.
Insert the protective cap.
–
Note
● In order to facilitate the removal of the socket with the bulb for the parking
light, we recommend to remove first of all the bulb for the low beam light.
● After installing the headlight, the headlight setting must be checked by a spe-
cialist garage.
Fig. 183 Removing the bulbs for the
parking and low beam light
⇒ f ig.
B 180.
183.
⇒ f ig.
B 180.
B up to the stop towards the left and
