202
Breakdown assistance
Wheel trim caps
Pulling off
Carefully remove the wheel trim cap using the wire clamp
–
Slackening and tightening wheel bolts
Slacken the wheel bolts before jacking up the vehicle.
Slackening wheel bolts
–
Insert the wheel wrench fully onto the wheel bolt
–
Grasp the end of the wrench and turn the bolt about one turn to the left
⇒ f ig.
166.
Use the appropriate adapter for slackening and tightening the safety wheel bolts ⇒ p age 203.
1)
Fig. 165 Pulling off wheel trim cap on
light alloy wheels
⇒ f ig.
165.
Fig. 166 Changing a wheel: Slackening
wheel bolts
1)
.
Tightening wheel bolts
–
Insert the wheel wrench fully onto the wheel bolt
–
Grasp the end of the wrench and turn the bolt to the right until it is tight.
WARNING
Slacken the wheel bolts only a little (about one turn) as long as the vehicle has
not yet been jacked up - risk of an accident!.
Note
Apply pressure carefully with your foot to the end of the wrench if it proves diffi-
cult to slacken the bolts. Hold tight on the vehicle when doing this and ensure
that you have a steady position.
1)
.