Licence plate light
–
Open the boot lid and unscrew the light glass
Take the defective bulb out of the holder and insert a new one.
–
Insert the glass cover of the light again and press it down to the stop - ensure
–
that the sealing rubber is correctly seated.
Screw on the light glass slightly.
–
Light unit (Octavia)
Fig. 189 Luggage compartment: Cover for the lamp holder/removing the lamp holder
Changing light bulbs in the lamp holder
–
Switch the ignition and all lights off.
–
Unlock the locking button and open the cover of the lamp holder
left.
Using the system
Safety
Fig. 188 Remove the licence plate light
⇒ f ig.
188.
⇒ f ig. 189
-
Driving Tips
Press the catches in the direction of arrow and take out the lamp holder
–
⇒ f ig. 189
- right.
–
Press the defective light bulb into the socket, turn to the left and remove.
Press a new light bulb into the socket and turn the light bulb to the right as far
–
as the stop.
–
Insert the lamp holder in such a way that the catches lock in place in the hous-
ing.
–
Close and lock the cover of the lamp holder.
Change the light bulb for the parking light
–
Switch the ignition and all lights off.
–
Unlock the locking button and open the cover of the lamp holder
left.
–
Take the defective light bulb (arrow
with a new one.
Close and lock the cover of the lamp holder.
–
Rear light unit (Estate car)
Fig. 190 Luggage compartment: Cover for the lamp holder/removing the lamp holder
Changing light bulbs in the lamp holder
Switch the ignition and all lights off.
–
Open the lamp holder cover
–
Take out the light bulbs of the tail light (arrow
–
General Maintenance
Breakdown assistance
Fuses and light bulbs
1
or
2
) out of the housing and replace it
⇒ f ig. 190
- left.
1
and
2
).
Technical data
219
⇒ f ig. 189
-
£