Setting Temperature - Skoda Octavia Owner's Manual

92 Heating and air conditioning system
Buttons/control dial
Setting of the temperature for the left side, operation of the seat heating of
7
the left front seat
Automatic mode
8
AUTO
Switching off Climatronic
9 OFF
Setting the blower speed
10

Button for direct switching on/off of auxiliary heater (parking heater)
11
Switching on/off of the temperature setting in dual mode
12
Switching cooling on and off
13
Setting of the temperature for the right side, operation of the seat heating of
14
the right front seat
Note
Below the top row of buttons is located the interior temperature sensor. Do not
glue or cover over the sensor, otherwise it could have an unfavourable effect on
the Climatronic.
Automatic mode
The automatic mode is used in order to maintain a constant tem-
perature and to demist the windows in the interior of the car.
Switching automatic mode on
Set a temperature between +18 ℃ and +26 ℃.
–
– Move the air outlet vents 3 and 4
slightly upwards.
– Press the button . In the right or left top corner a warning light lights up,
AUTO
depending on which unit was last selected.
If the warning light in the top right corner of the button
tronic operates in "HIGH" mode. The "HIGH" mode is the standard setting of the
Climatronic.
When pressing again the button
mode and the warning light in the top left corner lights up. The Climatronic uses
only in this mode the lower blower speed. However taking into account the noise
level, this is more comfortable, yet be aware that the effectiveness of the air con-
ditioning system is reduced particularly if the vehicle is fully occupied.
By pressing again the button
AUTO
DUAL
AC
⇒ f ig. 91
so that the air flow is directed
lights up, the Clima-
AUTO
, the Climatronic changes into the "LOW"
AUTO
, you change into the "HIGH" mode.
The automatic mode is switched off by pressing the button for the air distribution
or increasing or decreasing the blower speed. The temperature is nevertheless
regulated.
switching cooling on and off
switching cooling on and off
⇒ f ig.
– Press the button 95. The warning light lights up in the button.
AC
– When you again press the switch
warning light in the button goes out. Only the function of the ventilation re-
mains active when no lower temperature than the outside temperature can be
reached.

Setting temperature


You can separate the interior temperature for the left and right side separately.
– You can set the temperature for both sides after switching on the ignition
⇒ f ig.
with the control dial
7
If you wish to set the temperature for the right side, turn the control dial
–
The warning light in the button
temperatures for the left and right side can be set.
If the warning light in the button
cannot be set with the control dial
the button . The warning light in the button which indicates the possibility to
DUAL
set differing temperatures for the left and right side, goes out.
You can set the interior temperature between +18 °C and +26 ℃. The interior tem-
perature is regulated automatically within this range. If you chose a temperature
lower than +18 °C, a blue symbol lights up at the start of the numerical scale. If you
chose a temperature higher than +26 °C, a red symbol lights up at the end of the
numerical scale. In both limit positions the Climatronic operates at maximum cool-
ing or heating capacity, respectively. The temperature is not controlled in this
case.
Lengthy and uneven distribution of the air flow out of the vents (in particular at
the leg area) and large differences in temperature, for example when getting out
of the vehicle, can result in chills in sensitive persons.
, the cooling system is switched off. The
AC
95.
lights up, this indicates that differing
DUAL
lights up, the temperature for both sides
DUAL
7 . You can reinitiate this function by pressing


.
14
