Mitel OfficeConnect User Reference Manual page 82

76 Using the phone system
To cancel the retrieval of the parked call, press the
If you enter a park location where there is no caller on hold, the phone
LCD will briefly display "No Parked Call".
There are nine park locations available (1 through 9). If all park locations
are in use when you try to park a call, the phone LCD will briefly display
"Park Locations Full" and the call will be placed on hold.
If the call is left parked for 30 seconds, the phone of the person who
parked the call will beep and the phone's LCD will briefly display "Call
parked at: " with the park location number to remind you that the call has
not been retrieved.
Speaker on the 5212/5312 IP phone
Using Speaker, you can turn the speakerphone on your phone on and off. To
use Speaker, press the
Transfer call on the 5212/5312 IP phone
Using Transfer, you can transfer a call from one phone to another. To transfer
a call, follow these steps:
1
While on an active call, press the
call on hold, and the LCD screen displays:
Transfer To:
2
Enter the extension or phone number of the person to whom you wish to
transfer, or press a One-Touch Speed Dial button.
Transfer To: 415
3 Press the
the message "Transfer Complete" for approximately five seconds before
returning to an idle state.
Instead of pressing the
destination answers and then press the
If you enter an invalid extension during a transfer, the LCD screen displays
"Invalid Extension". To reconnect with the caller, follow these steps:
key.
key. The system places the
key once you hear ringing. The LCD screen displays
key immediately you can wait until the
key.
key.
Final