Table of Contents
Advertisement
112
Using the phone system
2
Press the Power On/Off button on the mouse.
Switch between speakerphone and the conference unit on
5324 phones
Follow this step to switch a call from speakerphone mode to the conference
unit:
1
Press the Power On/Off button on the mouse.
Follow this step to switch a call from the conference unit to the speakerphone:
1
Press the
key.
Switch between handset and the conference unit on 5324
phones
Note that your handset must be onhook (i.e. you must be in speakerphone
mode) to use the conference unit.
Follow these steps to switch a call from the handset to the conference unit:
1
Press the
key.
This switches the call to the speakerphone. You can replace the handset
at this point. It will not release the call.
2
Press the Power On/Off button on the mouse.
Follow this step to switch a call from the conference unit to the handset:
1
Lift the handset.
Adjust volume on the conference unit on 5324 phones
To adjust the volume on the conference unit while talking on a call, follow this
step:
1
Adjust the volume by pressing the Volume Up/Down keys on the mouse.
Note that the Arrow keys cannot be used to adjust the volume while using the
conference unit with the mouse attachment. These keys only apply to the
handset and speakerphone mode.
Use Presentation mode on 5324 phones
The 5310 Conference Unit has multiple directional microphones around the
disk. Based on sound that it detects, it turns on the microphone pointing in
that direction. As different speakers talk, it changes which microphone is on.
Presentation mode allows you to lock the unit so that the microphone
currently on stays on, thereby removing potential background noise.
To turn on Presentation mode while using the conference unit, follow this step:
Final
Advertisement
Table of Contents
