Maintenance; Replacement Parts; Factory Service - Standard Horizon Explorer GX1600E Owner's Manual

16 MAINTENANCE

The inherent quality of the solid-state components used in this transceiver will
provide many years of continuous use. Taking the following precautions will
prevent damage to the transceiver.
• Keep the microphone connected or the jack covered at all times to prevent
corrosion of electrical contacts;
• Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
• Ensure that the supply voltage to the transceiver does not exceed 16 VDC
or fall below 11 VDC.
• Use only STANDARD HORIZON-approved accessories and replacement
parts.
In the unlikely event of serious problems, please contact your Dealer.

16.1 REPLACEMENT PARTS

Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from your Dealer.
Commonly requested parts, and their part numbers are listed below.
• Dust Cover ( HC1600 ) : AAH79X101
• Power Cord: T9025406
• VOL and SQL Knob: RA1282500 (White), RA1282600 (Black)
• Mounting Bracket: RA1283100 (White), RA1283200 (Black)
• Mounting Bracket Knob: RA0978500 (White), RA0978600 (Black)
• Heat Sink Cover: RA1395300 (Black)
• Microphone Hanger: RA0436000 (White), RA0458800 (Black)
• RAM3 Mic Routing Cable Assembly: S8101512

16.2 FACTORY SERVICE

In the unlikely event that the radio fails to perform or needs servicing, please
contact your Dealer.
An "RA" Return Authorization number is not necessary to send a product in for
service. Include a brief note describing the problem along with your name,
return address, phone number, and proof of purchase.
Page 98
GX1600E