16 MAINTENANCE
The inherent quality of the solid-state components used in this transceiver
will provide many years of continuous use. Taking the following precautions
will prevent damage to the transceiver.
•
Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
•
Ensure that the supply voltage to the transceiver does not exceed 16
VDC or fall below 11 VDC.
•
Use only STANDARD HORIZON-approved accessories and replacement
parts.
In the unlikely event of serious problems, please contact your Dealer or our
repair facility. Address and phone numbers for this facility, as well as warran-
ty information, are contained in section "18 WARRANTY".
16.1 REPLACEMENT PARTS
Occasionally an owner needs a replacement mounting bracket or knob.
T h e s e c a n b e o r d e r e d f r o m o u r P a r t s D e p a r t m e n t b y e m a i l i n g
yaesuparts@yaesu.com or calling:
Marine Division of YAESU U.S.A.
6125 Phyllis Drive, Cypress, California 90630
Telephone (714) 827-7600
Commonly requested parts, and their part numbers are listed below.
• Power Cord: T9025406
• VOL and SQL Knob: RA116800B (White), RA116810A (Black)
• CH Knob: RA116780A (White), RA1167900 (Black)
• Mounting Bracket: RA078410C (White), RA078400B (Black)
• Mounting Bracket Knob: RA0978500 (White), RA0978600 (Black)
• Microphone Hanger: RA0436000 (White), RA0458800 (Black)
• RAM3+ Mic Routing Cable Assembly: S8101512
• Dust Cover: RA128810A (White only)
Page 122
GX2000/GX2150