Maintenance; Replacement Parts; Factory Service - Standard Horizon GX2400GPS Owner's Manual

23 MAINTENANCE

The inherent quality of the solid-state components used in this transceiver will
provide many years of continuous use. Taking the following precautions will
prevent damage to the transceiver.
• Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
• Ensure that the supply voltage to the transceiver does not exceed 16 VDC
or fall below 11 VDC.
• Use only STANDARD HORIZON approved accessories and replacement parts.

23.1 REPLACEMENT PARTS

Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from your Dealer.
Commonly requested parts, and their part numbers are listed below.
• DC Power Cord: T9025406
• VOL Knob: RA6274300
• SQL Knob: RA6283700
• DIAL/ENT Knob: RA6271400
• Mounting Bracket: RA078400C
• Mounting Bracket Knob: RA0978600
• Microphone Hanger: RA0458800
• SSM-70H (RAM4 Microphone) Routing Cable Assembly: S8101512
• USB Cable: T9101648

23.2 FACTORY SERVICE

In the unlikely event that the transceiver fails to perform or needs servicing,
please contact one of following:
In USA and Canada
Standard Horizon
Attention Marine Repair Department
6125 Phyllis Drive, Cypress, California 90630, U.S.A.
Telephone ( 800 ) 366-4566
In Europe
Yaesu ( UK ) Ltd
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U. K.
Telephone +44 ( 0 ) 1962 866667
In Other Countries
Contact the dealer or the distributor.
129