Maintenance; General; Factory Service - Standard Horizon HX890 Owner's Manual

* (When setting the region, the selected European Channel Group will be
displayed instead of "CANADA". For details, refer to the Note on Setting the
Region on the separate yellow insert sheet.)
3. Press the [ SELECT ] soft key to save the new setting.
4. If you want to set the ATIS feature to another channel group,
repeat step 1 through 3.
5. Press the [CLR] key to return to radio operation.

18. MAINTENANCE

18.1 GENERAL

The inherent quality of the solid-state components in STANDARD HORIZON
radios will provide many years of continuous use. Take the following precau-
tions to prevent damage to the radio:
• Never key the microphone unless an antenna or suitable dummy load
is connected to the transceiver
• Use only STANDARD HORIZON-approved accessories and replacement
parts.

18.2 FACTORY SERVICE

In the unlikely event that the radio fails to perform or needs servicing, please
contact one of following:
In USA and Canada
Standard Horizon
Attention Marine Repair Department
6125 Phyllis Drive, Cypress, California 90630, U.S.A.
Telephone (800) 366-4566
In Europe
Yaesu (UK) Ltd
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U. K.
Telephone +44 (0)1962 866667
In Other Countries
Contact the dealer or the distributor.
ATIS SETUP
ATIS GROUP
USA
INTL
ON
CAN
BACK SELECT
95