Table of Contents
Advertisement
Chapter 1 Using the Operator Panel
>Font Select
Internal
7
When the desired font is displayed, press the ENTER
key.
8
Press the MENU key. The message display returns to
Ready.
Changing Type for Courier/Letter Gothic
Courier or Letter Gothic font type can be selected as Regular
or Dark. For example, to change the type of Courier, proceed
as follows:
1
Press the MENU key.
2
Press the
or
pears.
Font
3
Press the
key.
4
Check that Internal is displayed and press the
key.
>Font Select
Internal
5
Press the
or
appears.
>>Courier
Regular
6
Press the ENTER key. A blinking question mark (?)
appears.
>>Courier
? Regular
7
Select Regular or Dark using the
8
Press the ENTER key.
9
Press the MENU key and the message display re-
turns to Ready.
1-28
>
key repeatedly until Font > ap-
>
>
key repeatedly until >>Courier
or
key.
Changing the Font Size
You can change the size of the default font. If the default font
is a fixed-pitch font such as Courier or Letter Gothic, the
character pitch can be changed instead of the font size.
1
Press the MENU key.
2
Press the
or
pears.
Font
3
Press the
key.
4
Check that Internal is displayed and press the
key.
>Font Select
Internal
5
Press the
or
pears.
>>Size
012.00 point(s)
6
Press the ENTER key. A blinking cursor ( _ ) ap-
pears.
>>Size
012.00 point(s)
7
Press the
or
ue of the figure where the cursor is blinking. The
font size can be set between 4 and 999.75 points, in
0.25-point increments. You can use the
to move the cursor right and left.
8
When the desired size is displayed, press the ENTER
key.
9
Press the MENU key. The message display returns to
Ready.
key repeatedly until Font > ap-
>
>
key repeatedly until >>Size ap-
key to increase or decrease the val-
and
key
Advertisement
Table of Contents
