Overriding Difference Between A4 And Letter - Kyocera Mita WP31C Operation Manual

3.10.7 Overriding Difference between A4 and Letter

When the Override A4/LT is turned on using the operator panel, the printer ignores the
difference between A4 and Letter paper sizes. Printing is performed without an error
message even if the actual paper size in the current cassette differs from the paper size
formatting the job.
By default, this feature is off. To confirm and turn on the Override A4/LT, proceed as
follows:
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Paper Handling >
3 3 3 3
Press the key.
4 4 4 4
Press the or
>Override A4/LT
Off
5 5 5 5
To change overriding mode, press the ENTER key. A blinking question mark (?)
appears.
>Override A4/LT
? Off
6 6 6 6
Press the or
7 7 7 7
Press the ENTER key. The overriding mode is set.
8 8 8 8
To exit the menu selection, press the MENU key.
key repeatedly until Paper Handling > appears.
key repeatedly until >Override A4/LT appears.
key to change Off to On.
3-77
3.10 Paper Handling