Setting The Paper Type; Setting The Paper Type In Paper Cassette; Setting The Paper Type In Mp Tray - Kyocera Mita Ecosys FS-6020 Operation Manual

Chapter 1 Using the Operator Panel

Setting the Paper Type

You can set paper type for each paper source including the
MP tray. Setting paper type for each paper source allows the
printer to automatically select appropriate paper source for
each printing job. This section explains how to set paper type
from the operator panel.
The following table shows paper type you can set for each pa-
per source. For details of paper type, see
Selection
.
Paper
Source
Media Type
Plain
Transparency*
Preprinted
Labels
Bond
Recycled
Vellum*
Rough
Letterhead
Color
Prepunched
Envelope*
Cardstock*
Thick*
Custom 1 (to 8)
* Can not print double-side

Setting the Paper Type in Paper Cassette

Make this setting to match the paper type fed from the paper
cassette of the printer. If the paper type is set correctly, you
can perform printing using the media type selection function
from the application (printer driver). The factory default set-
ting is Plain.
For more details about the paper types that can be fed from
Paper Type on page 2-6
the paper cassette, see
1 Press the MENU key.
2 Press the or
Handling > appears.
Paper Handling >
1-18
Chapter 2 Paper
MP Tray Paper Cassette
Yes Yes
Yes No
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes No
.
key repeatedly until Paper
3 Press the key.
4 Press the or
Type appears. The paper type is also displayed.
>Cassette Type
Plain
NOTE
>Cassette 2 Type to >Cassette 5 Type are
displayed for the installed option paper feeders in
descending order from the bottom of the printer.
5 Press the ENTER key. A blinking question mark (?)
appears.
>Cassette Type
? Plain
6 Press the or
paper type. The display changes as shown below.
Plain
Preprinted
Bond
Recycled
Rough
Letterhead
Color
Prepunched
Custom1(to 8)*
* You can define and register a desired paper type to the
printer in advance. See
page 1-19
for details.
7 When the desired cassette paper type is displayed,
press the ENTER key.
8 Press the MENU key. The message display returns to
Ready.

Setting the Paper Type in MP Tray

You can automatically select the paper cassette according to
the selection made by the application (printer driver). The
default setting is Plain.
For more details about the paper types that can be fed from
the MP tray, see Paper Selection on page 2-1
1 Press the MENU key.
2 Press the or
Handling > appears.
key repeatedly until >Cassette
key to display the desired cassette
Customizing Paper Type on
.
key repeatedly until Paper