Viewing Network Information; Ringing On Wireless Headsets - Avaya one-X 9621G User Manual

Introduction to 9621G and 9641G deskphones
Use plain water or a cleaner specifically designed for LCD, computer, or touch screens. Do not
use harsh chemicals, window cleaner, abrasives, aerosol sprays, ammonia, or solvents to
clean the touch screen. Do not let the cleaning liquid enter the phone through the openings.

Viewing Network Information

Your system administrator might ask you to check certain phone or network settings to
investigate problems. You can obtain network information from HOME>Settings >Network
Information.
Network Information has five different screens for viewing the options:Audio parameters, IP
(Internet Protocol) parameters, Quality of Service, Interfaces, and Miscellaneous.
Use the and the
network information on the various screens.
Your system administrator will instruct you further as to which network information options and
settings are needed.

Ringing on wireless headsets

For an incoming call, you can set the ringing tone on the wireless headset instead of the
speaker of the deskphone.
Note:
This feature is available only if enabled by your administrator for your deskphone.
When you go off-hook with the headset or change from a non-headset device to the headset,
the wireless headset is activated. When you go on-hook with an activated headset or change
from wireless headset device to non-headset, the wireless headset is deactivated.
When an incoming call arrives:
• If the deskphone is in an idle mode, a ringing tone is heard in the wireless headset.
• If the phone is already in a headset call, a short beep is heard in the wireless headset.
®
18 Avaya one-X Deskphone H.323 9621G and 9641G User Guide
icons on the upper right corner of the display to navigate and view the
Comments? infodev@avaya.com
December 2012