KTM 690 Enduro R EU Owner's Manual page 96

BRAKES
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Press the brake caliper onto the brake disc by hand in order to push back the brake pis-
tons. Make sure that no brake fluid escapes from the brake fluid reservoir. If it does,
clean it up.
Info
Make sure when pushing back the brake pistons that you do not press the brake
100254-11
caliper against the spokes.
–
Remove cotter pin
brake linings.
–
Clean brake caliper and brake caliper support.
400418-11
.

with membrane .
 
, remove bolt toward the right by striking it and remove the
 
94