BRAKES
–
Check that leaf spring
support are seated correctly.
400419-10
–
Insert the brake linings, insert the bolt and mount the cotter pin.
–
Operate the foot brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
–
Add brake fluid to the MAX mark.
Brake fluid DOT 4 / DOT 5.1 (
–
Mount the screw cap with the membrane.
Info
100289-01
Clean up overflowed or spilt brake fluid immediately with water.
in the brake caliper and sliding plate
p. 176)
103
in the brake caliper