Loading Paper; Loading Paper Into The Paper Feeder Unit Pf-707M - Konica Minolta AccurioPress C6100 Quick Manual

Colour production printing system
Hide thumbs Also See for AccurioPress C6100:
Table of Contents

Advertisement

4.1

Loading Paper

4
Basic Operations
4.1
Loading Paper
4.1.1

Loading paper into the Paper Feeder Unit PF-707m

The following describes how to load paper into an optional Paper Feeder Unit PF-707m. The same paper
loading procedure is used for Paper Feeder Unit PF-711 and Paper Feeder Unit PF-707m. The same paper
loading procedure is used for each tray.
1
Pull out the tray to load paper into.
NOTICE
Trays can be pulled out only when this machine is turned on.
Before pulling out the target tray, check that the sub power
switch is turned on.
In order to prevent the machine from falling down, only one
tray can be pulled out at a time.
2
Turn the side guide lock knobs (2 pieces) counterclock-
wise to loosen them.
3
While pressing the side guide lock release lever (
the side guide plates to any positions (
% Determine their locations based on the size indicator of
the bottom plate of the tray.
NOTICE
To slide the side guide plates, be sure to hold both side
guide plates together. If you move it by holding only either
of the side guide plate, the side guide plate that is held
may become displaced.
4
While pressing the rear guide lock release lever, slide the
rear guide plate to any positions.
% Determine their locations based on the size indicator of
the bottom plate of the tray.
5
To fix the side guide plates at the correct locations, load an appropriate amount of paper into the tray
while aligning it to the left-hand side of the tray.
NOTICE
Load paper with the print side facing up.
6
Press the side guide plates against the paper, then turn the side guide lock knobs (2 pieces) clock-
wise to fix them.
AccurioPress C6100/C6085
), slide
).
4
4-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Accuriopress c6085

Table of Contents