Height Adjustments; Armrests/Mudguard; Flip-Up Armrests; Detachable Armrest - Invacare XLT Max User Manual

5.8.3 Height adjustments

30-32 cm
Max 2 cm
Height adjustment
A backrest extension can be used for adjustable backrest
heights and to obtain heights over 35 cm. Two different
extenders are available, one for heights 30-32 cm and
one for heights 35-49 cm.
Important
Observe that the extenders may not be
raised more than 2 or 4 cm.
A
Tools: 4 mm Allen key
Loosen and remove screws (A) and the small plastic
bracket (B) on the back of the back support. Adjust
the backrest extension to the desired height and refit
the screws.
26
35-49 cm
Max 4 cm
B

5.9 ARMRESTS/MUDGUARD

5.9.1 Flip-up armrests

If your chair is equipped with armrests that can be
raised or lowered, this is achieved by loosening the
screw (A), moving the armrest into the required
position and retightening the screw.
When adjusting the height, do not
place your fingers between armrest
pad and sideplate as they may get
trapped.

5.9.2 Detachable armrest

B
If your chair is equipped with armrests that can be
raised or lowered, this is achieved by pulling up
the armrest and loosening the screw (B) under the
armrest. Move the screw up or down to the desired
position and retighten the screw. Lower the armrest
again.
When adjusting the height do not place your
fingers between seat tube and side plate as they
may get trapped.
Tools:
5 mm Allen key.
Tools: 5 mm Allen key.
XLT
Invacare ®