In this page, you can enable the log function. You can set Mode to Local,
Remote, or Both. Local indicates to save the log in the local computer. Remote
indicates to send the log to the remote log server. Both indicates to save the log
in the local computer and the remote log server.
To log the events, do as follows:
Step 1
Select Enable Log.
Step 2
Select a mode from the drop-down list.
If you select Remote or Both, enter the IP address and port number of
the server.
Step 3
Click Apply to apply the settings.
Step 4
Click View System Log to view the detail information of the system
log.
3.4.6 Logout
Choose Management > Logout. The page as shown in the following figure
appears:
88