In this page, you can configure the parameters of wireless LAN clients that may
connect to the device.
The following table describes the parameters in this page.
Field
Enable Wireless
Enable MultiAP
Isolation
Wireless Network
Name (SSID)
Visibility Status
Channel
Channel Number
Select or deselect the check box to enable or disable
the wireless function.
Select or deselect the check box to enable or disable
multiAP isolation. If this function is enabled, clients of
different SSIDs cannot access each other.
Network name. It can contain up to 32 characters. It
can consist of letters, numerals, and/or underlines.
Visible indicates that the device broadcasts the
SSID.
Invisible indicates that the device does not
broadcast the SSID.
You can select from the drop-down list: FCC(1-11),
ETS(1-13), JP(1-14)
Select the wireless channel used by the device from
the drop-down list. You can select Auto Scan or a
20
Description