Planet ADN-4100 User Manual page 45

Enabled: The WPS service is enabled by default.
Note:
Ensure that the network card supports the WPS function.
You can use one of the following there methods to use WPS authentication:
Press the WPS button on the side panel for 3 seconds.
In the WIRELESS WPS page, click PBC. It has the same function of the
WPS button on the side panel. This is an optional method on wireless
clients.
Note:
You need a Registrar when using the PBC method in a special case in
which the PIN is all zeros.
In the WIRELESS WPS page, enter the PIN code provided by the station
and click PIN. PIN entry is a mandatory method of setup for all WPS
certified devices.
Note:
If you are using the PIN method, you need a Registrar, either an access
point or a wireless router, to initiate the registration between a new device
and an active access point or a wireless router.
39