Planet ADN-4100 User Manual page 92

802.11n wireless adsl 2/2+ router

Hide thumbs Also See for ADN-4100:

Table of Contents

3.4.3.3 IP Address

In the ACCESS CONTROLS page, click IP Address. The page as shown in the

following figure appears:

In this page, you can configure the IP address in the access control list (ACL). If

ACL is enabled, only devices of the specified IP addresses can access the

device.

Select Enable Access Control Mode to enable ACL.

Note:

If you enable ACL, ensure that the IP address of the host is in the ACL list

Click Add. The page as shown in the following figure appears:

Enter the IP address of the desired device in the IP Address field and click

Apply to apply the settings.

Table of Contents