Using The Network Time Server; Configuring The Time Zone - Nortel 1535 User Manual

General configuration
• MM/DD/YYYY
• DD/MM/YYYY
An underline cursor shows which field in the format is ready for input.
9. Use the dialpad to enter in the new date.
10. After you finish, press OK.
The Set time window appears.
11. Enter the time, and press OK.

Using the Network Time server

1. In idle mode, press MENU.
2. Select Settings.
3. Press OK.
4. Select System
5. Press OK
6. Select Network Time.
7. Press OK.
8. Select Enable.
9. Press OK.
Your IP Phone 1535 now displays the date and time from the Network
Time Server.
For more information about configuring your IP Phone 1535, contact your
System Administrator.

Configuring the time zone

To select a time zone, perform the following steps.
1. In the idle state, press MENU.
2. Select Settings.
3. Press OK.
58
settings.